Wurth Liquid Metal Fe 1

LKR  12,250.00

Earn 41 Points


Quantity:
Fast Island-wide delivery.

All orders in Colombo & Suburbs are delivered within 2 working days, while all others are delivered within 3 working days.

Secure checkout.

SSL Enabled Secure Checkout

Coupon code for this month.

USE CODE - GIVEME10 to get 10%off for any car care category product. Limited time offer !!

Further discount on checkout.

When you choose direct bank transfer as your payment method at the checkout, you will receive an additional discount to promote cash purchases. Happy shopping!

Specifications

Ratio of ingredients Component A: Component B = 1:1
Density 2.8 kg/m³
Density conditions Components A and B mixed
Colour Grey
Min./max. gelation time 7-12 min
Min./max. curing time 4-24 h
Fully hardening/curing conditions Room temperature
Conditions for gelation time at room temperature
Working life 5 min
Conditions for working life at 20°C, 20 g total mass
Viscosity/consistency Pasty
Min. tensile strength 12.5 N/mm²
Min. combined tension and shear resistance 14.5 N/mm²
Coefficient of thermal expansion 0.0004 1/K
Min. compressive strength 70 N/mm²
Min./max. temperature resistance of the hardened material -60 to 120 °C
Weight of content  

  • 500 g

Liquid Metal Fe 1

Fast-acting repair system, ideal for installers and workshops in the metal processing sector.
  • High-quality two-component reaction resin system that exhibits characteristics similar to those of metal due to its special formula
  • The ideal mixing ratio of the components (A:B = 1:1, pressing out two strands of the same length from the tubes) makes incorrect mixing of the repair compound virtually impossible
  • Specifically designed for smaller repair jobs where a quick turnaround is required
  • Can be applied with a spatula and does not run, which also makes vertical application possible
  • After hardening, Liquid Metal Fe1 can easily be processed in the same way as metal with lathing, milling, drilling, filing or thread cutting

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

 

Application area

Particularly suitable for filling moulds, and for sealing and covering leaking areas.

Example applications

  • Abrasions on pump housings, impellers, propellers, rudders, heat exchangers, condensers, dust lines, slides, chutes, pins, broken threads
  • Sealing leaks on radiators, tanks, water containers, water lines, oil lines, housings
  • Cavities in grey cast iron during casting, grey cast iron during processing
  • Running-in damage on shafts, hydraulic cylinders, engine blocks, bearing seating, crank houses
  • Manufacturing of moulds, holders, models, guides, prototypes

 

InstructionsThe metals must be cleaned and degreased bare. Mix components A and B homogeneously 1:1. Apply the mixture immediately with a spatula (short pot life). The hardened liquid metal can be easily machined by lathing, milling, drilling etc. Please note the enclosed application instructions.

[shipping-calculator]

Customer Reviews

Login / Register
Cart 1
Cart